不同形态硼对油菜幼苗铝毒的缓解效应及其FTIR特征分析

采用水培法,以油菜品种Cao 221167为试验材料,设置无机态硼酸(BA)和有机态山梨醇硼(SB)及不同Al~(3+)(0、100、200和500μmol L~(–1))处理,研究不同形态硼(B)对油菜幼苗铝(Al)毒的缓解作用及不同形态B之间的缓解效应差异,以及利用FTIR(傅里叶红外光谱)技术分析叶片各物质含量的变化。结果表明,Al毒胁迫下,不同形态B(BA和SB)处理,显著提高植株生物量和根系长度(0、100、200和500μmol L~(–1) Al毒胁迫下BA处理根长分别增加了52.15%、101.45%、366.70%和18.73%;SB处理分别增加了46.80%、133.98%、261.36%和10.77%),提高色素含量和SOD活性,而降低了Al含量、MDA含量和POD活性。不同形态B处理下,油菜幼苗在200μmol L~(–1) Al~(3+)处理下长势、生物量及色素含量最高。在500μmol L~(–1) Al~(3+)处理下,油菜幼苗株高、根长、总干鲜重及色素含量显著低于无Al处理;FTIR分析表明,Al毒胁迫下油菜叶片中蛋白质和低聚糖等含量明显上升,加硼明显降低了蛋白质和低聚糖的含量,且BA处理降低幅度明显高于SB处理。说明不同形态B(BA和SB)的添加均明显缓解Al毒,且BA对Al毒缓解效果优于SB,这为农业生产中施用何种硼肥来缓解Al毒起到一定的指导作用。     

REVIEW: Properties of Cereal Brans: A Review

Cereal brans are functional ingredients with high nutritive value and enormous health properties. Cereal brans have not been fully utilized in food systems despite their health benefits. This review presents an overview on the physical, chemical, microbiological, functional, and sensory properties of cereal brans for possible comparisons and selection to enhance the utilization of this underutilized milling fraction.     

Application and mechanisms of metal-based nanoparticles in the control of bacterial and fungal crop diseases

Nanotechnology is a young branch of the discipline generated by nanomaterials. Its development has greatly contributed to technological progress and product innovation in the field of agriculture. The antimicrobial properties of nanoparticles (NPs) can be used to develop nanopesticides for plant protection. Plant diseases caused by bacterial and fungal infestations are the main types of crop diseases. Once infected, they will seriously threaten crop growth, reduce yield and quality, and affect food safety, posing a health risk to humans. We reviewed the application of metal-based nanoparticles in inhibiting plant pathogenic bacteria and fungi, and discuss the antibacterial mechanisms of metal-based nanoparticles from two aspects: the direct interaction between nanoparticles and pathogens, and the indirect effects of inducing plant resilience to disease. © 2022 Society of Chemical Industry.     

Towards developing resistance to chickpea chlorotic dwarf virus through CRISPR/Cas9-mediated gene editing using multiplexed gRNAs

Journal of Plant Diseases and Protection - Mastreviruses are an emerging group of viruses transmitted by leafhoppers and infect both monocot and dicot plants. Chickpea chlorotic dwarf virus...     

Hydraulic model investigation of downstream erosion of large regulators: a case study

Flow conditions, which could not be explained, occurred in the stilling basin and outfall channel of the Feni Regulator sited at the western end of the Feni River closure dam. This regulator controls outflows from the upstream reservoir which supplies irrigation water to Muhuri Project in Bangladesh. Analysis of flood discharge data revealed that the design discharge for the structure was not exceeded; yet abnormal scour occurred in the outfall channel and the brick block rip-rap placed thereon was damaged. A model study was conducted to understand the causes of such unusual local erosion downstream of the stilling basin and to provide answers to two main questions:

-Is potential scour serious in terms of the stability of the structure?

-What protection measures could be taken to stabilize the scour at a safe level?

Using a 1:30 scale model, the probable maximum scour was simulated, and the performance of alternative rip-rap designs including that of the existing one were examined. The results of this study supplemented by field scour data collected during subsequent flood seasons indicated that even if the flow rate through the regulator approaches the design flood discharge, the downstream scour is not likely to extend up to an elevation of ? 10.7 m, a scour level observed in the previous year at a lower discharge. It also showed that the existing rip-rap blocks were marginally undersized and consequently the rip-rap was prone to failure if flow conditions departed from uniform. A suitable method of scour protection downstream of the stilling basin at the regulator exit also evolved from the study.     

Effects of silvopastoral areas on milk production at dual-purpose cattle farms at the semi-humid old agricultural frontier in central Nicaragua

In extensive cattle production systems, the composition of grazing areas may significantly influence productivity. In dual-purpose cattle production systems in the lowland tropics, pasture lands with trees, so-called silvopastoral areas, are considered as being important, particularly to facilitate the management of crossbred European native cattle. The aim of the study was to quantify the effects of silvopastoral areas on production at dual-purpose cattle farms in the semi-humid lowlands of central Nicaragua. The relationships between seasonal milk production and herd data, and the proportions of land use types were examined for 74 farms by stepwise regression analysis.     

Impacts of Institutional Reforms on Irrigated Agriculture in Pakistan

Poor functioning of theirrigation system in Pakistan has been asource of concern for the last few decades,during which time it has been the subject ofconsiderable external assistance andinternal policy reforms. Consequently, thegovernment of Pakistan introducedinstitutional restructuring in irrigationand drainage subsectors to impartnecessary improvements. Under thesereforms, management at secondary canallevel has recently been handed over to theFarmers Organizations (FOs) of selecteddistributaries in pilot areas. This studywas designed to evaluate a farmer-manageddistributary in southern Punjab. Fieldmeasurements revealed that hydraulicaspects of the irrigation service deliveredby the FO management has been significantlyimproved and as a result highlyproportionate and equitable waterdistribution was observed, particularly atthe tail reaches of the distributary. Dueto effective FO management farmers'interventions to increase the outletdischarge by illegal means has been almosteradicated. As a result of theseimprovements imparted by the FO in systemmanagement, the extent of irrigated area hasincreased on average by 6 to 7%, evenunder severe drought-like conditionsprevailing in the country during recentyears. Further cost recoveries haveincreased by an amount of 14% for summerand 23% for winter growing seasons,respectively, from the irrigated area of thedistributary. Thus experience from Hakra4-R distributary has shown that even underundesirable natural circumstancesIrrigation Management Transfer (IMT) wasquite effective in achieving the keytargets of the institutional reformslaunched at pilot scale in the country.     

A study of water distribution from a branch to distributary canals: A case study of Gugera Branch,Punjab, Pakistan

This study was conducted on Gugera Branch of Lower Chenab Canal, Punjab, Pakistan. Sample distributaries off taking from Gugera Branch were selected for the study. The existing conditions of water distribution among the distributaries were studied. Field data were collected during the whole of 1988. Field observations suggested that the variability at the head of distributaries is much greater than the variability in the Gugera Branch under existing operational practices. The distribution of water among the distributaries is rarely in accordance with design criteria. Some channels get priority over other channels. The annual closure period varied from 17 to 41 days for different channels. The discharge at the head of distributaries remained lower than the standard operational range for 69 to 183 days in a year. The data suggested that a regulating gate at the head of the distributary can reduce discharge variation up to 2.4 times compared with a Karrees System (wooden stop logs used for water regulation). The data indicated that the adjustments in the head gate of a distributary on daily basis can substantially improve discharge conditions at the head of distributary. Rotational schedules are not being followed as per design and need to be improved. Most of the existing head discharge relationships of discharge measuring structures are not reliable. A frequent calibration of these structures is recommended.